Continuous Power for Mission Critical Applications

About Clary

Buy Clary UPS Online Now

Clary Product Applications

• Critical Apps
   
• Traffic/ITS
   
• Military
   
• Medical
   
• Harsh Environments

What's New in the Clary Line?

MEDICAL PRODUCTS WITH UL 60601-1 LISTING.
UL listing 60601-1 replace the older UL 544 and UL 2601 listing that defined requirements for electrical medical and dental equipment that is intended for professional use by personnel in hospitals, nursing homes, medical care centers, medical and dental offices and similar Health Care Facilities. The UL 60601-1 listing will apply to Clary Corporation S Series 1500Va products.

The Clary Product Line...

Customizable UPS Systems 1250VA to 2400VA

The only On-Line Double Conversion UPS system that offers selectable features to meet your application needs. Wide selection of features such as input/output isolation, switchable voltages or auto-sense capability, input circuit breaker protection and input and output termination selection options. Rugged design for applications in power plants, offshore drilling rigs, refineries and shipboard use; can double as an electronic power conditioner/frequency converter as well. All CT systems utilize Power Factor Correction, and RS232 and SNMP protocols are supported. Available in a 3U rack-mount configuration with extended battery options. Custom configurations and engineering available. RATINGS: 1,250/1,500/ 2,000/2400 VA; various input and output voltages available. UL listed.

More about the CT Series...

Digital UPS Systems

1250VA to 2400VA/ 2000VA to 2400VA

The DT Series features Clary’s On-Line Double Conversion, power factor corrected technology for high reliability. Cash registers, POS Terminals, workstations and communication equipment are typical applications that can benefit from Clary’s UPS products. All DT Series Systems support RS232 and SNMP protocols when communications back to the network are required. Available in tower and rack-mount configurations with support for external battery chassis when extended run-times are required. Custom configurations available. Please consult factory. RATINGS: 1,250VA to 2,400VA / 2,000VA
to 2,400VA; 120/120 VAC; 50/60 Hz. UL listed.

• Small size – 3U racks, smallest in the industry
• Power factor Corrected to near unity
• Rackmount version fits into standard 19” rack
• Outputs can be controlled remotely or from front panel
• Software selectable configuration (output frequency, voltage, alarms, auto turn-off, etc.)
• Automatic bypass and battery test
• Unit can also be cold started from batteries when no AC voltage is present.
• Tower units include carrying handles
• Many options available for custom configurations. Consult factory.

More about the DT Series...

DT Series - ET Rack and Tower

Digital UPS Systems for Extreme Conditions

- 40°C to +74°C

On-Line Double Conversion technology at its best. For that application where all others have failed due to extreme indoor or outdoor environmental conditions. Operates at temperatures where others will not! Ideal for those areas not environmentally controlled and in remote locations. All DT Series ET systems utilize Power Factor Correction, and RS232 and SNMP protocols are supported. Available in tower and rack-mount configurations with extended battery run times. Custom configurations and engineering available.

RATINGS: DT1,000R ET; 120/120 VAC; 50/60 Hz; -40°C to +74°C. UL listed.

Harsh Environment Applications
Clary’s DT1000R(ET) is the world’s most advanced Uninterruptible Power System (UPS) for extreme environment applications. The DT1000R(ET) keeps equipment running for 10 minutes to 10 hours or more (dependent on optional battery sizing) during power failures. Clary’s special Outpost™ batteries fit inside many existing cabinets and meet all NEMA temperature specifications for outdoor use.

More about the DT ET Series...

Global UPS Systems 1000VA to 2400VA

The GT Series features Clary’s On-Line Double Conversion, universal imput power factor corrected technology for high reliability. Cash registers, POS Terminals, workstations and communication equipment are typical applications that can benefit from Clary’s UPS products. All GT Series Systems support RS232 and SNMP protocols when communication back to the network are required.. Available in tower and rack-mount configurations with support for external battery chassis when extended run-times are required. Custom configurations available. Please consult factory. RATINGS: 1,250/1,500/2,000VA; 120/120 VAC; 50/60 Hz. UL listed.

• Power factor Corrected to near unity
• Outputs can be controlled remotely or from front panel
• Software selectable configuration (output frequency, voltage, alarms, auto turn-off, etc.)
• Automatic bypass and battery test
• Unit can also be cold started from batteries when no AC voltage is present.
• Tower units include carrying handles
• Many options available for custom configurations. Consult factory.

More about the GT Series...

RPS Series

Digital UPS Systems for Extreme Temperature Rugged Applications / Shipboard Grade

1250VA to 4000VA

Unlike commercial standby and hybrid UPS products, Clary's RPS Series products are designed and built to rugged specifications. All systems are digitally microprocessor controlled to provide clean, regulated power under all tactical conditions. All RPS SERIES systems are Power Factor Corrected (PFC) in real-time to ensure the highest possible efficiency. Full RS232 and SNMP interactive communications capability assures support of all types of command and control applications. 1,250/1,500/2,000/2,400 and 4000VA; 120 through 240 VAC input 45 to 65 Hz, 120 through 240VAC output; 50 or 60 Hz. UL listed.

• Small size - 5.25” - 3U Rack Space
• Power Factor Corrected to near unity
• Rackmount version fits into standard 19” Rack
• Outputs can be controlled remotely or from front panel (Optional)
• Software selectable configuration (output frequency, voltage, alarms, auto turn-off, etc.)
• Automatic bypass & battery test
• Unit can be started with out AC present (Cold Start)
• Many options available for custom configurations
• Transformer Isolation included

More about the RPS Series...

The Clary S Series UPS is the only UPS of its class to offer medical grade performance. This reliable power system is built to the highest quality standards. S Series systems are typically found in patient care areas, medical laboratories, nurse stations, medical or dental offices and are intended for non life support applications.

• Keeps equipment running at all times
• Improves power quality
• Protects all connected equipment
• Easy installation in the office or lab environment
• No interrupted procedures
• Enhanced patient security
• No invalid test result
• No revenue disruption

More about the S Series

Larger VA rated products that also feature all-digital On-Line Double Conversion Technology. Designed to provide maximum performance and reliability with Power Factor Correction. Fully isolated output, and a wide range of input and output voltage and frequency selection options are also available. Ideally suited for server farms, telecommunication applications and many other mission-critical applications where reliability is a must! Available in Tower configuration. RATINGS: 6 kVA; input voltages of 208 and 240Vac are standard and output voltages of 120/208/220/230/240 VAC; 50/60 Hz. UL listed.

• True On-line Double Conversion
• Supports Redundant Parallel Architecture (RPA)
• Symmetrical or N+1 Capability
• Protects all connected equipment
• Superior Battery Management
• No interrupted procedures
• Enhanced patient security
• No invalid test result
• No revenue disruption
• Manual maintenance bypass switch

More about the S603 Series...

Keeping intersections alive during power failures, Clary's SP Series is the world’s most advanced Uninterruptible Power System (UPS) for traffic applications. Without compromising existing cabinet wiring, the SP Series keeps LED signal heads running for up to 8 hours or more during power failures. Clary's continuous power systems fit inside most existing cabinets and meet all NEMA temperature specifications. Optional NEMA 3R Type II and Type III cabinets are available.

These systems also provide clean, regulated power for controllers and other sensitive equipment inside the cabinet. The SP1000SR/SN systems are intended for application where load usage will not exceed 875 watts. These systems are also available with an extended load option. The SP1250 SR/SN PLUS will allow for 1400 watts peak load for a ten second interval. This option accommodates intersections that have not yet replaced the yellow incandescent traffic lamps. Additionally, Clary can provide a SP2000SR/SN system that will sustain a continuous 1400 watt load. These systems require eight batteries and additional cabinet space or a separate cabinet such as the CBO-123 UPS cabinet.

Advanced communication features allow monitoring, configuration and control of the system over RS232, modem or network connections. Available for both NEMA and 332 style cabinets.

More about the SP Series...

E603 Series

Larger VA rated products that also feature all-digital On-Line Double Conversion Technology. Designed to provide maximum performance and reliability with Power Factor Correction. Fully isolated output, and a wide range of input and output voltage and frequency selection options are also available. Ideally suited for server farms, telecommunication applications and many other mission-critical applications where reliability is a must! Available in Tower configuration. RATINGS: 6 kVA; input voltages of 208 and 240Vac are standard and output voltages of 120/208/220/230/240 VAC; 50/60 Hz. UL listed.

• True On-line Double Conversion
• Supports Redundant Parallel Architecture (RPA)
• Symmetrical or N+1 Capability
• Protects all connected equipment
• Superior Battery Management
• No interrupted procedures
• Enhanced patient security
• No invalid test result
• No revenue disruption
• Manual maintenance bypass switch

More about the E603 Series...

Clary Corporation is a 65 year old company that began its existence as a high-tech manufacturing company building aircraft parts for the war effort. As time progressed and as the war wound down Clary began manufacturing gyroscopic device for military missile programs, portable computer devices and mechanical adding machines. In the late 80s Clary designed the first all solid state Uninterruptible Power Systems (UPS) for the power industry. This new system incorporated the latest solid-state devices to develop the first all solid-state UPS. Clary later refined its’ solid state technology and added all digital technology to define the rugged devices it manufactures today. Clary UPS systems are designed to go where others fail and are known world wide for their extreme temperature capability and rugged reliable design.

In 1977, Clary Corporation pioneered On-Line Double Conversion UPS technology, and in 1996 introduced digital control for continuous power UPS systems for mission-critical applications. Today, Clary manufactures a variety of superior power products here in the USA, and can customize specs to meet your application requirements. What’s more, our in-house field service department consistently sets the industry standard.